Tubing model
2
6
4
Tubing size
Metric size
(Series TU)
Inch size
(Series TIUB)
8 10
5 6.5
12
8
Burst pressure
Min. bending radius (mm)
Operating temperature
Refer to the burst pressure characteristics curve.
Recommended fittings
Fluid
Material
Cleanliness class (ISO class)
Air, Water
Polyurethane
Class 3
O.D. (mm)
Model
I.D. (mm)
Black (B)
White (W)
Red (R)
Blue (BU)
Yellow (Y)
Green (G)
Clear (C)
Orange (YR)
Model
Specifications
How to Order
10 15 20 27 35
–20 to 60°C, Water: 0 to 40°C (No freezing)
10-TU120810-TU106510-TU080510-TU060410-TIUB01
4
– 20 m roll
Burst Pressure Characteristics
Curve and Operating pressure
3.2
2.5
10-TU0425
4
10
- TU0425
BU
-
20
1.2
10-TU0212
2
Length per roll
20 — 20 m roll
Color
B — Black
W — White
R — Red
BU — Blue
Y — Yellow
G — Green
C — Clear
YR — Orange
For general pneumatic tubing
Flexible
Polyurethane tubing
Clean series
60
Burst pressure MPa
Operating temperature °C
40200-20
0
1
2
3
4
5
Max. operating pressure
Burst pressure
Max. operating pressure (20°C)
0.8 MPa
Polyurethane Tubing
Series 10-TU
RoHS
Clean series fittings 10-KQ2, 10-KF, 10-KDM, 10-KG
10-M, 10-MS, KP, KPQ, KPG
Fixed end
Bend the tube into U-form
at a temperature of 20°C.
Fix one end and close
loop gradually. Measure
2R when the tube breaks
or is crushed.
1. Applicable for general industrial water.
Please consult with SMC if using for the
other kind of fluid. Also, the surge voltage
pressure must be under the maximum oper-
ating pressure. If the surge pressure
exceeds the maximum operating pressure, it
will result in damage to fittings and tubes.
2. The value of the max. operating pressure is
at a temperature of 20°C. Refer to the burst
pressure characteristics curve for other tem-
peratures. Furthermore, abnormal tempera-
ture rises caused by adiabatic compression
may result in the burst of the tube.
3. The value of the minimum bending radius is
measured at the temperature of 20°C as
shown in the figure on the right.
Caution
Precautions
Be sure to read this before handling.
Refer to page 1382 for Safety In-
structions and pages 1237 to 1240
for Fittings and Tubing Precautions.
1232
