Made to Order Specifications
(Refer to pages 1395 to 1565 for details.)
JIS Symbol Specification
Long stroke type
Helical insert thread
Holder mounting bracket Ι
Holder mounting bracket ΙΙ
-XB11
-X168
-X416
-X417
2700 or less , 2701 to 5000
Specifications
Bore size (mm)
Fluid
Action
Operating pressure range
Proof pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Port size
16 25 40
Air
Double acting
0.1 to 0.8 MPa
1.2 MPa
5 to 60
폶
C
Air cushion, Shock absorber
Not required (Non-lube)
+1.8
0
M5 x 0.8
Rc 1/8
Bore size (mm)
Unit symbol
Shock absorber model
Stroke fine adjusting range (mm)
Stroke adjusting range
16 25 40
L
RB0806
0 to –5.6
L
RB1007
H
RB1412
0 to –11.5
L
RB1412
H
RB2015
0 to –16
Bore size
(mm)
16
25, 40
Standard stroke (mm)
100, 200, 300, 400, 500, 600, 700, 800, 900
1000, 1200, 1400, 1600, 1800, 2000
3000
5000
Maximum manufacturable
stroke (mm)
∗ Strokes are manufacturable in 1 mm increments, up to the maximum stroke.
When exceeding a 2000 mm stroke, specify “-XB11” at the end of the model number.
Refer to the Made to Order Specifications on page 1405.
∗ Fine stroke adjustment range is applicable for one side when mounted on a cylinder.
∗ The shock absorber service life is different from that of the MY2C cylinder depending on
operating conditions. Refer to the Specific Product Precautions for the replacement period.
Rc 1/4
Bore size (mm)
Without stroke adjusting unit
16 25
100 to 1000 mm/s
100 to 1500 mm/s
40
L unit and H unitStroke adjusting unit
Model
Max. energy absorption (J)
Stroke absorption (mm)
Max. impact speed (mm/s)
Max. operating frequency (cycle/min)
Spring
force (N)
Operating temperature range (°C)
Extended
Compressed
RB
2015
58.8
15
1500
25
8.34
20.50
RB
0806
2.9
6
1500
80
1.96
4.22
RB
1007
5.9
7
1500
70
4.22
6.86
RB
1412
19.6
12
1500
45
6.86
15.98
5 to 60
Note 1)
Shock Absorber Specifications
Standard Stroke
Piston Speed
Stroke Adjusting Unit Specifications
1000 or less
+1.8
0
+2.8
0
+2.8
0
1001 to 3000
Note 1) When exceeding the air cushion stroke ranges on page 1094, the piston speed should be
100 to 200 mm/s.
Note 2) Use at a piston speed within the absorption capacity range. Refer to page 1094.
∗
When exceeding the stroke fine adjusting range: Use the Made to Order
Specifications
“
-X416
”
and
“
-X417
”
. (Refer to page 1554 for details.)
JIS Symbol
Made to
Order
1099
Series MY2C
Mechanically Jointed Rodless Cylinder
Cam Follower Guide Type
