How to Order
Option
When only optional parts are required, order using the part numbers listed below.
PSE53 0
M5
Nil
L
C2L
Option
None
0
1
2
3
Sensor range
Positive pressure [0 to 1 MPa]
Vacuum [0 to –101 kPa]
Low pressure [0 to 101 kPa]
Compound pressure [–101 to 101 kPa]
M5
R06
R07
Port size
M5 x 0.8
ø6 reducer
1/4 inch reducer
Sensor cable (3 m)
Connector for pressure sensor controller (1 pc.) +
Sensor cable (3 m)
Description Part no.
ZS-28-C
ZS-26-F
ZS-26-J
Note
1 pc. per set
Cable length: 3 m
Connector for pressure sensor controller
Sensor cable
Connector for pressure sensor controller
+ Sensor cable
Piping Specifications
Model M5
M5 x 0.8 male thread
R06
ø6 reducer type
Pressure sensor: Silicon, O-ring: NBR
Body: PBT
38 g
3.8 g
Body: Stainless steel 304
41 g
7 g
R07
1/4 inch reducer type
Port size
Wetted parts material
With sensor cable (3 m)
Without sensor cable
Mass
Specifications
Model PSE530 (Positive pressure)
0 to 1 MPa
–0.1 to 0 MPa
1.5 MPa
PSE531 (Vacuum)
0 to –101 kPa
10.1 to 0 kPa
Air/Non-corrosive gas/Non-flammable gas
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)
15 mA or less (with no load)
Analog output 1 to 5 V (with rated pressure range), 0.6 to 1 V (with extension analog output range), Output impedance: Approx. 1 kΩ
±2% F.S. or less (with rated pressure range), ±5% F.S. or less (with extension analog output range)
±1% F.S. or less
PSE533 (Compound pressure)
–101 to 101 kPa
—
PSE532 (Low pressure)
0 to 101 kPa
–10.1 to 0 kPa
500 kPa
Rated pressure range
Extension analog output range
Proof pressure
Applicable fluid
Power supply voltage
Current consumption
Output specification
Accuracy (Ambient temperature at 25°C)
Linearity
Repeatability
Power supply voltage effect
Enclosure
Temperature range
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Temperature characteristics
Sensor cable/Option
Standards
±1% F.S. or less
±1% F.S. or less based on the analog output at 18 V ranging from 12 to 24 VDC
IP40
Operating: 0 to 50°C; Stored: –10 to 70°C (No freezing or condensation)
1000 VAC, 50/60Hz for 1 minute between live parts and case
5 MΩ or more between live parts and case (at 500 VDC Mega)
10 to 500 Hz 1.5 mm amplitude or 98 m/s
2
acceleration, X, Y, Z directions for 2 hours each (De-energized)
980 m/s
2
in X, Y, Z directions, 3 times each (De-energized)
±2% F.S. or less (Based on 25°C)
Halogen-free heavy-duty cable, 3 cores, ø2.7, 3 m, Conductor area: 0.15 mm
2
, Insulator O.D.: 0.8 mm
Compliant with CE marking
Environmental
resistance
Cable length: 3 m
Note) At the factory, the connector is not attached to the
cable, but packed together with it for shipment.
The connector is not attached
to the cable at the time of
shipment.
Series PSE530
Pressure Sensor
829
